USS TITAN-A 3D Printer Model
The file 'USS TITAN-A 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'USS TITAN-A 3D Printer Model' is (stl) file type, size is 1.6MB.
Note: You may want to scale this up a little. It runs somewhere between the size of the eaglemoss and amt models (I say this loosely. My initial print ran small but workable so i'm happy with it. Pix just as soon as I finish it)
Remixed/mashed version of the uss titan -a from star trek picard (aka uss "no").
Recommend printing the saucer sections, drive sections, nacelles, nacelle covers at the very least, with supports. bussard collectors and impulse engines are meant to be printed in translucent red, plasma covers in blue, bridge module and bottom dome in clear/translucent white if you want to light it up , etc. I spent time hollowing it out in the simplest way possible so that anyone can add their own lights. in addition you may want to drill out the windows for more lighting. as usual, please don't sell it, and don't come to me asking for help. It's a free file and I don't really have the time for it. I'm aware cura will likely tell you some parts are not fit for printing with whatever error it gives you. However they will print just fine. Have fun with it! When I get around to completing my own I'll share pix.
| bottom_drive_with_stand_holes.stl | 293.1KB | |
| bottom_saucer_dome_and_thrusters.stl | 158.6KB | |
| bridge.stl | 79.6KB | |
| busard_collectors.stl | 65.5KB | |
| deflector.stl | 3.8KB | |
| drive_bottom.stl | 282.8KB | |
| drive_top.stl | 1.1MB | |
| impulse_engines.stl | 9.8KB | |
| nacelles.stl | 184.3KB | |
| nacelle_tops.stl | 74.4KB | |
| plasma_windows.stl | 151.3KB | |
| rear_plasma.stl | 1.3KB | |
| saucer_bottom.stl | 878.2KB | |
| saucer_top.stl | 850.0KB | |
| stand.stl | 225.6KB | |
| wing_covers.stl | 14.0KB |
