The USS Monitor is one of my favorite ships of all times and I always wanted a detailed model. While this is only a start I may do a second model even more detailed later. The scale is 1:140 and I have no idea why I made it in that scale. I haven't printed this out yet so I don't know about the tolerances of some of the parts. When printing out parts you need to print 2 of the following parts - Air vents, Anchor sides, Stacks, Cannon and Gun Carriages. Print out 4 of the Gun Carriage Caps. I have also included the Propeller & Shaft in one piece along with the Anchor in one piece. Since my printer won't print them in one piece, I divided them up. The holes along the side of the main deck and turret are for the railings and flag poles.
Sorry Everyone But I have had to change the Licensing on this item due to someone selling some of my other items on Ebay
| Uss_Monitor_-_Air_Vent.stl | 26.8KB | |
| Uss_Monitor_-_Anchor.stl | 172.4KB | |
| Uss_Monitor_-_Anchor_Cap.stl | 79.8KB | |
| Uss_Monitor_-_Anchor_Main.stl | 52.0KB | |
| Uss_Monitor_-_Anchor_side.stl | 59.8KB | |
| Uss_Monitor_-_Cannon.stl | 1.4MB | |
| Uss_Monitor_-_Gun_Carriage.stl | 97.2KB | |
| Uss_Monitor_-_Gun_Carriage_Cap.stl | 23.5KB | |
| Uss_Monitor_-_Hull.stl | 499.2KB | |
| Uss_Monitor_-_Propeller.stl | 1.7MB | |
| Uss_Monitor_-_Propeller_Cap.stl | 24.9KB | |
| Uss_Monitor_-_Propeller_repaired.stl | 2.1MB | |
| Uss_Monitor_-_Propeller_Shaft.stl | 28.2KB | |
| Uss_Monitor_-_Propeller__Shaft.stl | 1.7MB | |
| Uss_Monitor_-_Rudder.stl | 82.7KB | |
| Uss_Monitor_-_Stack.stl | 26.2KB | |
| Uss_Monitor_-_Turret.stl | 642.2KB | |
| Uss_Monitor_-_Turret_Floor.stl | 32.8KB | |
| Uss_Monitor_-_Wheel_House.stl | 28.4KB | |
| Uss_Monitor__-_Main_Deck.stl | 2.9MB |
