USB Switch Hole Cover For Toyota Yaris 3D Printer Model
The file 'USB Switch Hole Cover For Toyota Yaris 3D Printer Model' is (stl,stp) file type, size is 156.4KB.
The file 'USB Switch Hole Cover For Toyota Yaris 3D Printer Model' is (stl,stp) file type, size is 156.4KB.
Added single port configuration
v2 Update
Modified to fit head units which come with USB extensions for CarPlay/AndroidAuto. The female end of the USB extension should be 11mm x 19mm.
Apply high temperature hot glue, epoxy, or super glue to the sides of the USB extensions and insert into the 3D printed part.
Custom Toyota Yaris USB cover for two USB ports
For Second Gen Toyota Yaris (2005 to 2013)
v1 requires a custom cut PCB, which clips in underneath. The clips are the exact width of the switch hole (18.5mm).
You can find source files on my github as well:
https://github.com/XDleader555/cad_models/tree/main/yaris_usb_port_cover
| Toyota_Yaris_USB_Cover.stl | 21.0KB | |
| Toyota_Yaris_USB_Cover.stp | 115.4KB | |
| Toyota_Yaris_USB_Cover_Single_v2.stl | 173.9KB | |
| Toyota_Yaris_USB_Cover_Single_v2.stp | 149.3KB | |
| Toyota_Yaris_USB_Cover_v2.stl | 187.8KB | |
| Toyota_Yaris_USB_Cover_v2.stp | 167.7KB |
