USB Power And Display Holder 3D Printer Model
The file 'USB Power And Display Holder 3D Printer Model' is (STL) file type, size is 9.2MB.
The file 'USB Power And Display Holder 3D Printer Model' is (STL) file type, size is 9.2MB.
I had a multiport USB charger that kept falling over and I wanted to have a display for voltage and current monitoring but needed them to be all together. So I bought a display and some USB angle adapters from Amazon and created a holder for all the parts.
Works good and allows the display to be visable and the USB power unit does not fall over anymore.
There are 3 STL, just the USB charger holder, the USB display holder and then the combined version.
USB Power Unit: ZSM090A (3.7" x 1.113")
USB Display: https://www.amazon.com/gp/product/B0BJ253W31/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
USB Angle Adapters: https://www.amazon.com/gp/product/B0921N1WWW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
| USB_Charge_and_Display_All_in_One.STL | 15.7MB | |
| USB_Display_Support.STL | 88.3KB | |
| USB_Power_Port_Support.STL | 9.2MB |
