USB Organizer 3D Printer Model Free Download

Description Files (5)

Summary

Parametric USB Organizer with screw holes (on the back) to mount it on a wall.

There are many models for USB holders/organizers in Thingiverse but all I cound find were in one row so I made a model with OpenSCAD and decided to share it here. This model is suitable for wall mounting.

This model is a customizable model, you can use Thingiverse Customizer to customize.
Body:

number of rows
number of columns
spacing between the holes
corner radius

Screw holes (on the back)

diameter of the screw head
diameter of the screw shank/threat
height of the screw head
tolerance of the screw head hole.

Connector

size of the connector (the defaults are for USB A)
tolerance of the connector hole which you can tweak so the holes aren't too tight.
I have used 0.3mm which gives a snug fit.
Please note - if your printer is not calibrated you should use something like 0.5.
The tolerance can also be filament brand/type dependent due to shrinkage. So test it with a small piece before you print a large one.

Usb_Organizer_1.1.scad	8.8KB
Usb_Organizer_1x1.stl	986.6KB
Usb_Organizer_2x4.stl	1.2MB
Usb_Organizer_8x12.stl	1.5MB
Usb_Organizer_8x4.stl	1.2MB

USB Organizer 3D Printer Model

Summary

Tags

You might also like