USB Holder for a CD/ DVD Box,
Since i found nothing similar to this i decided to design my own USB in a Box Holder.
Because of Tolerances of 3d Printers pls print the >>>>>testobj<<<<< testobjects FIRST!!!
Try wich version fits the best and after that print the fitting cdbox file.
"testobj -0.25 mm" means the holder hole is 0.25mm bigger then the standard and the usb stick will fit easier.
If you have chosen one that is to big the usb stick will fall out.
I printed it with 0,8mm Nozzle diameter and it looks nice.
With 0,8mm it takes just 54 minutes.
Please dont put a Disc inside the box with the holder installed because the disc would bend over time.
Maybe you have to look for a dvd case that fits the usb holder perfectly because there are big differences on the market.
A nice idea would also be to glue it with a two sided gluetape.
Happy printing!
| cdbox_v3_-025mm.stl | 52.4KB | |
| cdbox_v3_-05mm.stl | 51.8KB | |
| cdbox_v3_-075mm.stl | 52.2KB | |
| cdbox_v3_-1mm.stl | 52.0KB | |
| cdbox_v3_standard.stl | 53.3KB | |
| testobj_-0.5mm.stl | 87.4KB | |
| testobj_-025mm.stl | 85.6KB | |
| testobj_-075mm.stl | 82.6KB | |
| testobj_-1mm.stl | 80.5KB | |
| testobj_standard.stl | 104.1KB |
