USB Handbrake 3D Printer Model
The file 'USB Handbrake 3D Printer Model' is (STL) file type, size is 324.6KB.
The file 'USB Handbrake 3D Printer Model' is (STL) file type, size is 324.6KB.
You will need to print :
1 bloc complet
2 écarteurs levier
1 fixation levier
2 fixation potentiomètre
1 goupille
1 levier
1 piece potentiomètre
The pieces aren't in the right printing direction, I'll let you put them back the right way before printing.
You will also need 2 screw (length 9cm, diameter 9mm), one nut and two washers.
For electronics, I'll let you watch the following video: https://www.youtube.com/watch?v=kv0FTpRLFMY
| Bloc_complet.STL | 678.6KB | |
| Ecarteur_levier.STL | 120.6KB | |
| fixation_levier.STL | 146.7KB | |
| fixation_potentiometre.STL | 23.7KB | |
| goupille.STL | 36.4KB | |
| Levier.STL | 87.8KB | |
| piece_potentiometre.STL | 80.7KB |
