USB Cable Organizer 3D Printer Model
The file 'USB Cable Organizer 3D Printer Model' is (stl) file type, size is 24.6MB.
The file 'USB Cable Organizer 3D Printer Model' is (stl) file type, size is 24.6MB.
USB Cable Organizer
I designed this USB cable organizer so that I would be able to move it if I necessary.
I have included 4 different versions, a straight and a curved version with a snap-in insert and also a straight and a curved version without an insert
This was the first time I tried to design an snap together Thing, and it turned out fairly well.
Please let me know if you have any problems.
I designed this for a standard (1 1/2") (38 mm) thick table. If your table is a different thickness, message me with the size, and I will try to help you out.
Also if you have a different wire diameter I will modify it if possible.
EDIT
I have included a longer clamp screw to accommodate for a thinner table.
EDIT January 17 2019
I added a 26 mm standard version that will fit a 1 inch table.
EDIT February 08 2019
Added a 30 mm version at the request of a member.
EDIT February 10 2019
Added a 52 mm version at the request of a member.
EDIT May 13, 2019 2019
Added a no bottom version at the request of a member.
You can use two-way adhesive tape to secure it.
EDIT July 09 2019
Added a 22 mm version at the request of a member.
EDIT August 22 2019
Added a 22 mm version with wider slots at the request of a member
EDIT October 02 2019
Added a 147 mm version at the request of a member.
EDIT October 08 2019
Added a 97 mm version at the request of a member.
EDIT Nov 17 2019
Added a 40 mm version at the request of a member.
EDIT Jan !6 2020
Added a 36 mm version at the request of a member
EDIT Feb 3 2020
Added a 36 mm version with wider slots at the request of a member.
EDIT May 17 2020
Added a 17 mm version at the request of a member.
EDIT August 2020
Added a longer version that can be screwed on along with a shorter version that can be screwed on. https://www.thingiverse.com/thing:2892387
| 147_mm_Standard_Cable_Holder_Body_v1.stl | 2.6MB | |
| 17_mm_Standard_Cable_Holder_Body_v2.stl | 3.7MB | |
| 22_mm_Standard_Cable_Holder_Body_v2.stl | 3.4MB | |
| 26_mm_Standard_Cable_Holder_Body_v2.stl | 3.7MB | |
| 30_mm_Sandard_Cable_Holder.stl | 3.3MB | |
| 36_mm_Standard_cable_holder.stl | 3.6MB | |
| 40_mm_Standard_Cable_Holder.stl | 1.6MB | |
| 52_mm_Standard_Cable_Holder.stl | 3.1MB | |
| 97_mm_Standard_Cable_Holder_Body_v3.stl | 2.7MB | |
| Cable_holder_Standard_Inert__Main_Body.stl | 3.5MB | |
| Cable_Holder_Standard_Insert.stl | 267.9KB | |
| Clamp_Screw_v12.stl | 6.9MB | |
| Curved_Cable_holder_Insert.stl | 291.3KB | |
| Curved_Cable_Holder_Main_Body.stl | 3.8MB | |
| Curved_Standard_Main_Body.stl | 3.6MB | |
| Longer_Clamp_Screw_v2.stl | 6.8MB | |
| Longer_version_Screwed_Standard_Cable_Holder_Body_v2.stl | 1.3MB | |
| No_Bottom_Vesion_Standard_Cable_Holder_Body_v3.stl | 2.2MB | |
| Screwed_Standard_Cable_Holder_Body_v2.stl | 1.2MB | |
| Standsard_Cable_Holder.stl | 3.6MB | |
| Wider__slots_5_mm_22_mm_Standard_Cable_Holder_Body_v2.stl | 3.4MB | |
| Wider__slots_5_mm_36_mm_Standard_Cable_Holder_Body_v2.stl | 3.3MB |
