USB And SD Card Holder 3D Printer Model
The file 'USB And SD Card Holder 3D Printer Model' is (stl) file type, size is 179.5KB.
The file 'USB And SD Card Holder 3D Printer Model' is (stl) file type, size is 179.5KB.
Organize your USB sticks and SD cards with this door shape holder. It has working handle. You need one paperclip for door hinges and a small spring or rubber band for door handle system.
For door window I used 0.5mm transparent plastic sheet, but if you have transparent filament use this to print window.
Assembly in video below. Some parts updated. Added spacer, which goes on the handle shaft between door and lock inside part.
Video: https://youtu.be/A3h-qUa8eOI
3D PRINTING SETTINGS
Layer height: 0.28mm for door casing
0.16 for small parts
0.2 for boxes and door
Infill: 15% or more
Speed: 45mm/s
Supports: Boxes need supports, others don't
| Box1.stl | 11.4KB | |
| Box2.stl | 14.3KB | |
| Casing.stl | 52.6KB | |
| Door.stl | 101.9KB | |
| Door_pin.stl | 44.8KB | |
| Handle.stl | 223.5KB | |
| Lock_casing.stl | 18.6KB | |
| Lock_inside.stl | 83.8KB | |
| Lock_spacer.stl | 36.0KB | |
| USB_SD_Box.stl | 22.0KB | |
| Window.stl | 6.5KB | |
| Window_casing.stl | 12.6KB |
![Cable Saver [ Usb – Microusb ] 3D Printer Model](https://cdn.3axis.co/assets/83/1a/db/a6/831adba6-2935-43e8-89a2-637b29b83253/images/ec126ff0-501f-4ebb-8cc1-3399eec216a5_thumb.jpg)
