US Western Locomotive 1_scale 1:32 3D Printer Model
The file 'US Western Locomotive 1_scale 1:32 3D Printer Model' is (stl,pdf) file type, size is 9.7MB.
The file 'US Western Locomotive 1_scale 1:32 3D Printer Model' is (stl,pdf) file type, size is 9.7MB.
This is a model that is inspired by various Western locomotive models. it is a working motorized model. see the film here
https://www.youtube.com/watch?v=gmnInLuiID0
I have used the LGB motor with worm gear at both ends, see pictures last in line
At first I thought to have Led in the lantern. Then I found small bulbs for 18-24 V, which gives an old impression of light.
I have attached a PDF that you can twist and turn the Locomotive, in Adobe Reader
Locomotive's length from the rear cab edge to cow catcher tip is 330mm
Loco Tender you will find at this link
http://www.thingiverse.com/thing:893402
| bell_holder__ny_2mm.stl | 149.5KB | |
| loco_Bell.stl | 332.5KB | |
| loco_bell_arm.stl | 340.3KB | |
| loco_Blow-off_handle.stl | 9.3KB | |
| Loco_bottom_motor_.stl | 80.1KB | |
| loco_cab.stl | 147.9KB | |
| loco_cab_bottom.stl | 66.7KB | |
| loco_cab_roof.stl | 67.2KB | |
| loco_chimney.stl | 118.4KB | |
| loco_cow_grille.stl | 65.9KB | |
| loco_cow_grilleholder.stl | 138.5KB | |
| loco_cow_grille_brace__print_2_pcs.stl | 41.7KB | |
| loco_Driving_wheel_without_counterweight_LGB_print_2pcs.stl | 1.1MB | |
| loco_Driving_wheel_without_counterweight_print_2_pcs.stl | 1.1MB | |
| loco_Driving_wheel_with_counterweight_LGB_print_2pcs.stl | 1.2MB | |
| loco_Driving_wheel_with_counterweigh_print_2_pcs.stl | 1.1MB | |
| loco_framework_for_the_main_wheels_and_bearings.stl | 111.2KB | |
| loco_guide_rail_brackets_print_8_pcs.stl | 17.1KB | |
| loco_lantern.stl | 109.8KB | |
| loco_lantern_bracket_L.stl | 1.6MB | |
| loco_lantern_bracket_R.stl | 1.6MB | |
| loco_lantern_top.stl | 281.6KB | |
| loco_lock_shaft_for_boogie.stl | 25.5KB | |
| loco_Main_drive_axel_pint_4_pcs.stl | 3.8KB | |
| loco_Main_rod_print_2_pcs.stl | 37.4KB | |
| loco_Nr3_.stl | 621.5KB | |
| loco_Piston_rod_holder_L.stl | 16.9KB | |
| loco_Piston_rod_holder_main_part.stl | 127.0KB | |
| loco_Piston_rod_holder_R.stl | 23.1KB | |
| loco_Piston_rod_print_2_pcs.stl | 45.6KB | |
| loco_Sid_rod_print_2_pcs.stl | 35.2KB | |
| loco_sliding_bearings_636mm_print_4_pcs.stl | 8.5KB | |
| loco_soot_door_frontal.stl | 581.2KB | |
| loco_the_main_body_lower_part.stl | 900.9KB | |
| loco_the_main_body_upper_part.stl | 2.2MB | |
| loco_truck.stl | 221.8KB | |
| loco_truck_and_cylinders__holder.stl | 405.6KB | |
| loco_truck_spacer_washer.stl | 14.1KB | |
| loco_truck_wheelshaft_pint4_pcs_585mm.stl | 3.6KB | |
| loco_truck_wheel__Print_4_pcs.stl | 46.3KB | |
| Loco_twisting_and_turning_in_Adobe_Reader2.pdf | 4.3MB | |
| loco_Whistle_handle.stl | 5.4KB | |
| loco_window_Front_print_2_pcs.stl | 2.4KB | |
| loco_window_Oval_print_2_pcs.stl | 31.6KB | |
| loco_window_Sidet_print_4_pcs.stl | 2.4KB | |
| loco_window_small_Front_print_2_pcs.stl | 2.4KB | |
| loco_wooden_walking_bridge_R.stl | 32.7KB | |
| loco_wood_boiler__front.stl | 276.0KB | |
| loco__sign_print_2_pcs_lok_skylt.stl | 180.3KB | |
| loko_wooden_walking_bridge_L.stl | 31.3KB |
