Upscaled Scorponok’s Gun 3D Printer Model
The file 'Upscaled Scorponok’s Gun 3D Printer Model' is (STL) file type, size is 12.8MB.
The file 'Upscaled Scorponok’s Gun 3D Printer Model' is (STL) file type, size is 12.8MB.
Since the new Scorponok figure had no gun included, i decided to build one for him.
I basically measured and 3D modeled the original G1 gun, then scaled it up to 230mm long.
I also included a few extra holes to attach blast effects, and kept the pegs at 5mm so it still can be connected to the figure in various configurations.
I made this gun for myself, and since my printer is very small, I had to split it up in 4 parts, that can be glued back together. But I also included the full sized two parts model.
Since this is a direct upscale of an old gun, these parts are not designed for 3D printing, but i did add a few angled walls to make it better.
| Project_Scorponok_Gun_Full_Part01_Rev03.STL | 15.9MB | |
| Project_Scorponok_Gun_Full_Part02_Rev03.STL | 3.4MB | |
| Project_Scorponok_Gun_Part01_Rev03.STL | 1.9MB | |
| Project_Scorponok_Gun_Part02_Rev03.STL | 2.3MB | |
| Project_Scorponok_Gun_Part03_Rev03.STL | 12.1MB | |
| Project_Scorponok_Gun_Part04_Rev03.STL | 4.6MB |
