Upgrades And Mods For “Micro-Sketch” 3D Printer Model
The file 'Upgrades And Mods For “Micro-Sketch” 3D Printer Model' is (stl) file type, size is 25.6KB.
The file 'Upgrades And Mods For “Micro-Sketch” 3D Printer Model' is (stl) file type, size is 25.6KB.
Just a page where I am going to upload all my mods for Ferjerez's "Micro-Sketch".
Better Base: I never got the base to print with Simplify3D, so I combined a few pieces into one printable base that will work with Simplify3D.
Draw Area Gear: My daughter is very young and had trouble keeping the paper in place...so this gives you an area to lock a piece of paper into.
Short Y Axis Pen Holder combined: Trimmed length so it's just long enough if you use the "Draw Area Gear" and it also includes a much easier to print pen holder combined into one piece. In the future I will design a printable closure for it...right now I just use small nut/bolts.
**I'll upload quite a few other pieces I'm working on still such as:
A base mod with spots for magnets so you can stick on the fridge and write notes to the family.
Shorter x,y lengths for smaller build areas
1 piece knob/gears for easier printing
etc, etc
***All design credit goes to Ferjerez, as I've just used calipers and based everything off his original design.
| Better_to_print_Base.stl | 88.2KB | |
| Draw_Area_Gear.stl | 26.3KB | |
| Short_Y_Axis_Pen_Holder_combined.stl | 59.5KB |
