Upgraded Clip For Round Build Plate (200mm) 3D Printer Model
The file 'Upgraded Clip For Round Build Plate (200mm) 3D Printer Model' is (stl) file type, size is 218.3KB.
The file 'Upgraded Clip For Round Build Plate (200mm) 3D Printer Model' is (stl) file type, size is 218.3KB.
This design is loosely based on Thinner42's glass clamp.
It fits on an AnyCubic Kossel delta printer with a 200mm diameter print bed. It should work on any printer that uses extruded 2020 aluminum as a frame. These clips hold the glass very securely and don't allow for any movement.
I have also created a 240mm variant, this is untested, and have been told that it does not actually fit. I'm working on a redesign.
You will need the following for each clip:
3 x M4x8mm
3 x M4 square nut.
(For all 3 clips you will need 9 of each)
I have had succes sprinting this design without any support. There is one small hollow in the larger component, but my printer was able to print it.
| Base_Clip.stl | 505.1KB | |
| Base_Clip_240.stl | 445.1KB | |
| Top_Clip.stl | 71.6KB |
