Upgrade CNC Laser / For Eccentric Spacer 3D Printer Model
The file 'Upgrade CNC Laser / For Eccentric Spacer 3D Printer Model' is (stl) file type, size is 196.5KB.
The file 'Upgrade CNC Laser / For Eccentric Spacer 3D Printer Model' is (stl) file type, size is 196.5KB.
ALL THESE VERSIONS OF PARTS HAVE NOT BEEN TESTED, BE CAREFUL THERE MAY BE ERRORS !!!
Y-Left -> It is a version of the part of the Y axis (left part), I removed the spacers embedded in the support to be able to put real metal spacers and eccentric spacer for the third bearing.
Y-Left-Motor -> Like the Y-Left but I put a hum of 2mm if we want to put two motors on each side of the axis without using a smooth bar of 8mm. The belt is directly on the branch of the engine so it has to be advanced and that's what I did.
Y-Right: It is a version of the part of the Y axis (right part), I removed the spacers embedded in the support to be able to put real metal spacers and eccentric spacer for the third bearing.
X-Back -> It's a remix of X-Back, there were four slots for four bearings and I removed one so that there are only three like on the Y axis. I also removed the flanges for powers put real spacers and an eccentric spacer.
X-Front -> It's a remix of X-Front, there were four slots for four bearings and I removed one so that there are only three like on the Y axis. I also removed the flanges for powers put real spacers and an eccentric spacer.
| X-Back.stl | 130.5KB | |
| X-Front.stl | 363.2KB | |
| Y-Left-Motor.stl | 209.5KB | |
| Y-Left.stl | 184.8KB | |
| Y-Right.stl | 158.5KB |
![Y-axis Linear Bearing [624zz] 3D Printer Model](https://cdn.3axis.co/assets/cd/d0/ee/4a/cdd0ee4a-b50d-4de1-9f6c-a974d3522136/images/b42d89b3-ef6a-4bba-b236-7f5a20f5d98d_thumb.jpg)
