[Updated]Butterfly Knife(Trainer) 3D Printer Model
The file '[Updated]Butterfly Knife(Trainer) 3D Printer Model' is (stl) file type, size is 146.66 KB.
The file '[Updated]Butterfly Knife(Trainer) 3D Printer Model' is (stl) file type, size is 146.66 KB.
[Update]
Alright all problems have been resolved- use the "bolts" to print in permanent bolts to the handles- just stop the print midway(when it starts printing the circular cap) and place the handles and blade in and continue printing. However, 8-32 bolts are still smoother and i find they work better- just add some blue thread lock to the nut and you should be good to go. For beginners who will most likely drop the knife often, the "Handle Plain V2s" will work better as the slots in the regular handles will break if dropped too many times.
Old
Most likely will post a second set of files with updated blade/ handle since those prints came out unsatisfactory to me. As of now the pins don't fit the holes in the handles and are tight in the blade- though I haven't tried to sand the holes or pins down to size. To take the place of the pins, 8-32 bolts should work perfectly. Spacers like the ones in the photo might be applicable to make the flipping smoother and less "clacky." All problems should be resolved in the second batch of files!
| Blade_V4.STL |
| bolts.STL |
| Handle_Plain_V2.STL |
| Handle_V3.STL |
