UNSC SAW [Halo 4/5] 3D Printer Model
The file 'UNSC SAW [Halo 4/5] 3D Printer Model' is (stl) file type, size is 1024.0KB.
The file 'UNSC SAW [Halo 4/5] 3D Printer Model' is (stl) file type, size is 1024.0KB.
The UNSC SAW from Halo 4 and Halo 5 sliced up and ready to print! Every piece is scaled according to the Official Halo Visual Guide, so this is a 100% accurate prop! I've added a build guide that labels the parts and where they go (since there's a lot) and arranged each piece to minimize overhang and use of support material. just download and print!
Want to see more, go visit my Thingiverse page to see my other models!
RECOMMENDED SETTINGS:
Quality: medium to high (depending on your patience)
Support material: minimal
Infill: 5-10% (to save time/filament)
| Halo_5_SAW.stl | 1.1MB | |
| SAW_1.stl | 82.3KB | |
| SAW_10.stl | 6.0KB | |
| SAW_11.stl | 22.2KB | |
| SAW_12.stl | 15.4KB | |
| SAW_13.stl | 255.7KB | |
| SAW_14.stl | 78.6KB | |
| SAW_15.stl | 66.7KB | |
| SAW_16.stl | 6.3KB | |
| SAW_17.stl | 20.2KB | |
| SAW_18.stl | 12.2KB | |
| SAW_19.stl | 20.6KB | |
| SAW_2.stl | 302.5KB | |
| SAW_20.stl | 19.2KB | |
| SAW_21.stl | 361.4KB | |
| SAW_22.stl | 1.1MB | |
| SAW_23.stl | 102.9KB | |
| SAW_24.stl | 6.2KB | |
| SAW_25.stl | 28.0KB | |
| SAW_26.stl | 21.0KB | |
| SAW_27.stl | 250.6KB | |
| SAW_28.stl | 11.7KB | |
| SAW_29.stl | 11.7KB | |
| SAW_3.stl | 91.1KB | |
| SAW_30.stl | 158.7KB | |
| SAW_31.stl | 11.7KB | |
| SAW_32.stl | 32.1KB | |
| SAW_33.stl | 8.1KB | |
| SAW_4.stl | 310.8KB | |
| SAW_5.stl | 209.1KB | |
| SAW_6.stl | 156.1KB | |
| SAW_7.stl | 30.2KB | |
| SAW_8.stl | 275.5KB | |
| SAW_9.stl | 48.9KB |
