Unmatched Modular Character Holder/Insert 3D Printer Model
The file 'Unmatched Modular Character Holder/Insert 3D Printer Model' is (stl) file type, size is 62.0KB.
The file 'Unmatched Modular Character Holder/Insert 3D Printer Model' is (stl) file type, size is 62.0KB.
I wanted to be able to store everything into one box. This will allow for up to 9 characters in the main box. I made this to be modular so that you could swap out different dial trays for each character. I also made a generic set that is big enough for any of the dials out currently, though Robin Hood will have to tuck his extra outlaw token somewhere else. These can be glued together or just left loose, what ever you prefer. Also, because of this, I made the model box very snug around the base so that the model doesn't wiggle around. The pressure is just on the colored rings and shouldn't hurt the models, I have tested it with each of mine. Bigfoot will poke out of the top a little, he's just too much of a beefcake.
I have not gotten to test all of the personalized dial trays yet, so if you get it printed out before I do and find an issue please let me know!
EDIT: Had the wrong card holder file uploaded. The old one will technically work but is very very snug. The one I have up now gives the cards room to breathe.
EDIT: Realized getting out the models once it was glued together was a problem. Added a "loose" model holder option. The original is still probably best if the models aren't being glued down to the cards and dials or if you have them standing upright.
| Alice-Dial.stl | 30.9KB | |
| Bf-Dial.stl | 30.9KB | |
| BL-Dial.stl | 17.5KB | |
| Cards.stl | 8.7KB | |
| Dial-ANY.stl | 33.8KB | |
| Dial.stl | 32.9KB | |
| KA-Dial.stl | 31.3KB | |
| Medusa-Dial.stl | 20.4KB | |
| Model.stl | 2.8KB | |
| ModelLoose.stl | 3.6KB | |
| RH-Dial.stl | 21.5KB | |
| Sinbad-Dial.stl | 30.9KB | |
| Unmatched-CharacterBundle-Complete.stl | 44.3KB |
