Unmatched Board Game Cases – Sleeved 3D Printer Model
The file 'Unmatched Board Game Cases – Sleeved 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Unmatched Board Game Cases – Sleeved 3D Printer Model' is (stl) file type, size is 1.9MB.
Summary
This is an organization and storage solution for the Unmatched board game. It is designed for those who have sleeved cards. If you want a unsleeved version that fits more characters per box, see my other design here.
Each character from the game has its own storage box measuring 142 × 109 × 30mm. Each case contains all of the pieces required for that character.
8 character cases fit into the large-sized (4-character) box along with two large-sized game boards. 4 character cases fit into the small-sized (2-character) box along with one small-sized game board and the instruction manuals. These cases allow you to fit all of your characters into only two boxes.
Everything fits very snug. Depending on the calibration of your printer, you may need to up the hole tolerance a bit to make sure that the fighter minis fit into place. Each fighter mini snaps into place in it's own case. Some (i.e., Alice, Dr. Jekyll, Dracula, Invisible Man, Medusa, Sherlock) can be inserted straight into the case. The rest need to be rotated slightly to clip into place.
This takes a very long time to print. Each case (×13) took me about 11 hours. In total, I spent about a week printing this. The final weight of the large case is over 6 lbs or 2.75 kg. The small case weighs 2.2 lbs or 1.0 kg. But, if you want an elegant and space-saving solution to store your Unmatched characters, there is no better solution.
I will continue to update these models as more characters are released.
Update: 10-Feb-2021
I just finished designing and printing the cases for the Little Red & Beowulf expansion! I should add the Buffy the Vampire Slayer Cases soon. Thanks for the support!
Update: 11-Feb-2021
I just finished designing the cases for the Buffy the Vampire Slayer expansion. Thanks to everyone who worked with me on this project and for your support! Hopefully we will have more expansions to add soon!
| Sleeved_Alice_Case.stl | 261.2KB | |
| Sleeved_Angel_Case.stl | 338.0KB | |
| Sleeved_Beowulf_Case.stl | 324.0KB | |
| Sleeved_Bigfoot_Case.stl | 387.1KB | |
| Sleeved_Bruce_Lee_Case.stl | 352.7KB | |
| Sleeved_Buffy_Case.stl | 279.3KB | |
| Sleeved_Deadpool_Case.stl | 352.8KB | |
| Sleeved_Dracula_Case.stl | 326.8KB | |
| Sleeved_Dr_Jekyll_Case.stl | 333.2KB | |
| Sleeved_InGen_Case.stl | 362.7KB | |
| Sleeved_Invisible_Man_Case.stl | 545.3KB | |
| Sleeved_King_Arthur_Case.stl | 514.5KB | |
| Sleeved_Little_Red_Case.stl | 388.7KB | |
| Sleeved_Medusa_Case.stl | 334.3KB | |
| Sleeved_Raptors_Case.stl | 424.2KB | |
| Sleeved_Robin_Hood_Case.stl | 429.0KB | |
| Sleeved_Sherlock_Case.stl | 632.1KB | |
| Sleeved_Sinbad_Case.stl | 375.3KB | |
| Sleeved_Spike_Case.stl | 331.4KB | |
| Sleeved_Willow_Case.stl | 284.7KB | |
| Small_Box_Case_Divider.stl | 82.9KB |
