Universal Suction Cup Handle – Various Sizes 3D Printer Model
The file 'Universal Suction Cup Handle – Various Sizes 3D Printer Model' is (stl) file type, size is 3.0MB.
The file 'Universal Suction Cup Handle – Various Sizes 3D Printer Model' is (stl) file type, size is 3.0MB.
If you find this thing useful, please leave a Like ❤ and Post a Make!
A set of handles designed with flexibility in mind.
Handles come in many sizes, each named after it's width and height.
They're measured by a distance (mm) from a center of one suction cup to the center of another, see attached pictures.
Available versions:
You need four 40mm suction cups for each handle. Other sizes may work. Suction cups require a 5mm hole through the center to be mounted in a handle - see attached pictures. You can look for suction cups that comes with a plastic hook, as it can be effortlessly removed.
Model requires supports. Both tree and classic will do. I used mice-ear brim to make sure adhesion around suction cup latch is sufficient. Handle is designed to be printed in place, no need to split latches from handle. Hinges will print just fine, they require a little force to be moved for the first time.
Make sure to check print settings notes before printing!
This thing was designed in Fusion 360 and printed on Bambu Lab P1S/A1 using Orca slicer.
| Suction_Cup_Handle_W120_H100.stl | 1.4MB | |
| Suction_Cup_Handle_W120_H120.stl | 1.2MB | |
| Suction_Cup_Handle_W140_H100.stl | 1.2MB | |
| Suction_Cup_Handle_W140_H140.stl | 1.1MB | |
| Suction_Cup_Handle_W160_H120.stl | 1.1MB | |
| Suction_Cup_Handle_W160_H160.stl | 1.0MB | |
| Suction_Cup_Handle_W180_H140.stl | 1.0MB |
