Universal Screws Organizer 3D Printer Model
The file 'Universal Screws Organizer 3D Printer Model' is (stl) file type, size is 416.0KB.
The file 'Universal Screws Organizer 3D Printer Model' is (stl) file type, size is 416.0KB.
This design was created for Ender 5 Pro and requires a bed with a side of at least 220 mm.
This box contains inner room for 8x8 units.
You'll need the following:
Rafts:
You may need rafts for small pieces like pins, latch, and maybe small inner boxes.
Supports:
All parts are printable without supports except the latch and the prong on the main box.
Assembling:
Be attentive when you are assembling the latch: the prong goes into the smaller window.
| Box.stl | 97.7KB | |
| InnerBox1x1.stl | 88.2KB | |
| InnerBox1x2.stl | 85.0KB | |
| InnerBox1x3.stl | 82.9KB | |
| InnerBox1x4.stl | 83.3KB | |
| InnerBox1x6.stl | 72.7KB | |
| InnerBox1x8.stl | 71.8KB | |
| InnerBox2x2.stl | 90.9KB | |
| InnerBox2x3.stl | 83.1KB | |
| InnerBox2x4.stl | 87.4KB | |
| InnerBox2x6.stl | 81.3KB | |
| InnerBox2x8.stl | 79.6KB | |
| InnerBox3x3.stl | 93.2KB | |
| InnerBox4x4.stl | 93.2KB | |
| Latch.stl | 129.3KB | |
| LatchPin.stl | 79.4KB | |
| Lid.stl | 600.7KB | |
| Pin.stl | 82.5KB |
