I bought a set of axle sliders for my Yamaha MT-09 but some how one fell off when riding one day.
I copied the design of the ones i bought using TinkerCAD and printed out a spare.
Recommend printing using all walls (i.e. 100% infill, but printed as walls).
I printed using PLA, but you could use any filament type really.
You can use a threaded tube to slide in the middle of the axle and then afix with bolts, or you could use expanding wall plugs and screws to afix it to the centre of the axle.
I used the threaded tube since i already had that.
You'll need to print four of these - two for the front wheel, two for the rear.
| axle_slider.stl | 123.8KB |
