Universal Magnetic Hook 3D Printer Model
The file 'Universal Magnetic Hook 3D Printer Model' is (stl) file type, size is 462.0KB.
The file 'Universal Magnetic Hook 3D Printer Model' is (stl) file type, size is 462.0KB.
This is a universally usable hook.
Besides the printed part you need a magnet.
I used a 10x10x4 mm neodym magnet. But sizes up to 14x14x4mm should fit easily.
If not resized, the slot in the part is made to fit am 4 mm thick magnet.
The thin wall of the slot is designed for a 4mm nozzle.
CARE:
The Orientation of the print should consider the way, in which the thin wall of the slot is printed.
I uses these low-priced magnets, which, in my case lift about 0,5kg:
You can also fit a cycle shaped magnet with a diameter of ~10mm as long as its 4mm thick.
| magnetic_hook.stl | 1.5MB |
