Universal Laptop Stand MK3 3D Printer Model

Author: @
License: CC BY
File formats: stl,dxf,skp
Download type: zip
Size:8.0MB

The file 'Universal Laptop Stand MK3 3D Printer Model' is (stl,dxf,skp) file type, size is 8.0MB.

Summary

Now I can consider this project finished. The original stand has been used with all kind of computers, tablets, laptops and even notebooks. This last version includes some minor details that will make your device fit perfectly avoiding the risk of falling down the stand.

You have to cut (using the DXF file) or print (using the STL files) 2 arms and 2 supports.

The vitamins needed are the same than in previous versions, but I now include nut caps created by jspark:

  • 3 x 20cm (or longer) M8 threaded bars
  • 12 x M8 nuts
  • 12 x M8 Washers (optional)
  • 6 x Closed M8 nut caps
  • 6 x Open M8 nut caps

We replaced all the MK2 in the office by MK3 as we found that some devices (specially the thinner MacBooks Air) could fall from the stand. That's not fun, one of these machines costs as much as a compatible kidney.

In addition I also include DXF files that will allow your stand to be processed in your favorite laser cutter. I strongly advice Acrylic, 8 or 10mm for this stand in that case. And orange. I love orange.

A video with all the steps is also available.

If you would like to support my work you can buy a laptop stand here

2_x_Arm.stl 196.1KB
2_x_Support.stl 241.3KB
Caps.stl 48.5MB
Laptop_stand.dxf 170.0KB
Laptop_stand.skp 3.0MB