UPDATE!
I made case that allowed me to convert the Baofeng 5 base charger to a portable / dash mounted charger using this mount. The link to it is here:
https://www.thingiverse.com/thing:4812149
This is a really simple handheld radio and mic mount for a dashboard, wall, or any vertical surface. It uses the belt clip on handheld radios and should work on many different things that use a belt clip. If needed, you can rescale it to fit the clip you want to use and mount.
I also provided a 3mm spacer and +/- angle spacers (2.5D increments up to 15D) to adjust vertical mounting. Recommend using 3M double sided tape to mount, but I included some small screw holes if that doesn't work.
So far it works with:
Baofeng 5
Baofeng 8
Baofeng microphone
Midland 75-822
Cobra microtalk
If you run a print and it fits your radio (or thing), let me know what make / model and I will add it to the list.
Thank you...
| +10_D_spacer.stl | 81.2KB | |
| +12.5_D_spacer.stl | 81.0KB | |
| +15_D_spacer.stl | 80.8KB | |
| +2.5_D_spacer.stl | 31.3KB | |
| +5_D_spacer.stl | 80.9KB | |
| +7.5_D_spacer.stl | 80.9KB | |
| -10_D_spacer.stl | 81.2KB | |
| -12.5_D_spacer.stl | 81.0KB | |
| -15_D_spacer.stl | 80.8KB | |
| -2.5_D_spacer.stl | 80.9KB | |
| -5_D_spacer.stl | 80.9KB | |
| -7.5_D_spacer.stl | 80.9KB | |
| 3mm_spacer.stl | 80.9KB | |
| universal_cb-ham_radio-mic_mount.stl | 415.7KB |
