Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.

The following Makita tools have been tested so far in the 40mm version:

• Makita DTD171
• Makita DDF484
• Makita DDF484B
• Makita DHP484
• Makita DDF459
• Makita DHP481
• Makita DTW300
• Makita DTW302
• Makita DHG180
• Makita DHG181
• Festool T18+3
• Milwaukee 2553 M12 Fuel **
• Milwaukee 2504 M12 Fuel **
• DeWalt DCE530 **
• DeWalt DCD771 ** (seems also to fit in 35mm)
• DeWalt DCF887 ** (seems also to fit in 35mm)
• DeWalt DCF885 ** (seems also to fit in 35mm)
• DeWalt DCD985 **
• Surebonder Ultra DT-3100FAMZS **
• Porter Cable PCC601
• Porter Cable PCC641

The 35mm version fits good for:

• Makita DDF487
• Makita DHP487
• DeWalt DCD778 **

The wide version fits:

• Makita DWT700 **
• Makita DWT701 **
• Ryobi PBLIW01 **

Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.

Printing
Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)

Update 04.05.2023
I've added another design for the holder, based on the idea of @mnemic. I has the same sizes as the other, but saves even more filament.

Update 06.10.2023
I've added a wider version of the holder, for Tools like the DWT700 or DWT701. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.

** = Information from users who printed the models.