Here's another modification I've done to be compatible with the Skadis Pegboard!
The easiest was putting the hook on. The hardest was making sure every controller I had was fully compatible. I used the modified ps4 controller holder as a base, but I added a few things:
You should print this sideways, since it'll have the most strength
I wouldn't trust the hooks to work too well if printed normally. Sure, you'll use up a bit of filament for supports, but it'll be a better print.
Printed in PLA. The filament I used was "PrimaValue PLA White" (Amazon affiliate link): https://www.amazon.co.uk/gp/product/B013IHXBSE/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=umar167-21&linkId=0b32cfbfa134ff977ea08f9a7c63c9f2&language=en_GB
You can support my work here: https://ko-fi.com/umar167
| PS4_Xbox_One_Steam_Switch_Pro_Skadis_wall_holder_umar167_v5.stl | 865.0KB |
