Under Shelves Drawers 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:2.0MB

The file 'Under Shelves Drawers 3D Printer Model' is (stl) file type, size is 2.0MB.

Summary

These drawers can be useful to store little tools or stuff: bolts, nuts, springs, etc. A holder is attached under a shelf, and the drawer fit the rails.

You will need at least three wood screws. One or two M3 hex nut and bolts are optional. If you attach a nut / two nuts and a bolt / two bolts will serve as a stop to prevent drawer to pull out of the holder.

A label container is designed as well.

Besides, a drawer-in-parts version is supplied, although not fully tested. Grips must be checked in this version.

Find a customizable design in https://cad.onshape.com/documents/a10f952a2e68ee928b8a1b17/w/6dc405a58271f2665fb25e8e/e/b2dba5d59a2d660243391b7d?renderMode=0&uiState=65c649b3a793552b65143cb4

This design can be modified using some parameters:

  • width: total width holder + drawer.
  • length: total length
  • height: total height holder + drawer.
  • tol: general tolerance
  • toltuerca: hex nuts M3 tolerance and grips tolerance
  • taladro: width of wood screws
  • ancho_etiqueta: little tag width
Cajonera_-Holder_140x75.stl 3.9MB
Cajonera_-Holder_190x48.stl 441.6KB
Cajonera_-_Bandeja_central_140x75.stl 331.9KB
Cajonera_Parte_Delantera_140x75.stl 301.7KB
Cajonera__Parte_Trasera_140x75.stl 224.8KB