Under Desk Drawer 3D Printer Model
The file 'Under Desk Drawer 3D Printer Model' is (stl) file type, size is 11.4KB.
The file 'Under Desk Drawer 3D Printer Model' is (stl) file type, size is 11.4KB.
I wanted a small cheap narrow drawer to go under my desk. The only one I could find would take a month and a half to come from China. So here we are. lol
Print the files in orientation the STLs were saved as. I used a glue stick when printing the mount to make sure it would stay in place. Not sure if it's needed but better safe than sorry.
Once the pieces are printed, attach the mount to the desk, slide in the drawer, and super glue the faceplate to the drawer. You can use clamps or tape to hold it in place.
The drawer has a notch in it to prevent it from being pulled out on accident.
Drawer Inner Dimensions: 5.28 x 7.85 x 1.4" (134mm x 199mm x 36mm)
Required Printer Bed Size:
• Height: 208mm
• Width: 205mm
| Under_Desk_Drawer.stl | 3.8KB | |
| Under_Desk_Drawer_Face.stl | 1.1KB | |
| Under_Desk_Drawer_Mount.stl | 47.3KB |
