Under Cabinet / Shelve Storage Jars 3D Printer Model
The file 'Under Cabinet / Shelve Storage Jars 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Under Cabinet / Shelve Storage Jars 3D Printer Model' is (stl) file type, size is 1.7MB.
This is an under cabinet or shelve jar storage system. There are two styles of holders, each holding up two 4 jars. One holder is basically 4 lids combined together, and the other works with a custom lid with two small, protruding feet that slide into a slot in the holder. Each jar is removable individually. Check out the video for a quick demo.
https://www.youtube.com/watch?v=Tdqe0BWc_n4
Jars are 85mm wide by 134mm (tall jar) and 99mm (short jar). There is a solid version and a version with a rectangular hole pattern. For all versions, the walls are 1.5mm thick. I might add other thicknesses if requested.
All items can and should be printed without supports.
| 4_inch_jar_solid.stl | 566.2KB | |
| 4_inch_jar_with_holes.stl | 791.2KB | |
| 4_inch_jar_with_smaller_holes.stl | 899.4KB | |
| 5.3_inch_jar_solid.stl | 535.4KB | |
| 5.3_inch_jar_with_holes_pattern.stl | 608.8KB | |
| jar_holder_2_jars.stl | 139.6KB | |
| jar_holder_with_slots.stl | 200.0KB | |
| jar_holder_with_threads.stl | 629.6KB | |
| jar_lid_with_inserts.stl | 230.1KB | |
| Lid.stl | 230.1KB |
