Under-cabinet Benchy Rack 3D Printer Model
The file 'Under-cabinet Benchy Rack 3D Printer Model' is (scad,stl) file type, size is 1.1MB.
The file 'Under-cabinet Benchy Rack 3D Printer Model' is (scad,stl) file type, size is 1.1MB.
IMPORTANT: The OpenSCAD/Customizer for this model is very complex and takes quite a while to produce the customized .stl. If you generate a customized width, please wait for 5-10 minutes before giving up and creating it again.
I cleared off a shelf by mounting 3 of these racks to display my benchies, so that I can quickly see what spools of filament I have stashed away in various drawers and cabinets.
I printed with the front of the racks on the print bed, no supports or brim required. I used Magigoo adhesive to prevent warping and to ensure solid adhesion.
If you have a Bambu Lab printer and use Bambu Studio, you can download the print profile here: https://makerworld.com/en/models/150776
I installed the racks using small wood screws, but you could also use 2-sided 3M tape.
You can download the 6-wide model or use the Customizer to define your own width. Each 2-Benchy section is 33 mm wide.
| Benchy_Rack.scad | 1.6MB | |
| Rack.stl | 2.1MB |
