Umarex Fusion 2 Single Shot Tray 3D Printer Model
The file 'Umarex Fusion 2 Single Shot Tray 3D Printer Model' is (stl) file type, size is 52.8KB.
The file 'Umarex Fusion 2 Single Shot Tray 3D Printer Model' is (stl) file type, size is 52.8KB.
This is what we have all been waiting for!!! The Umarex Fusion 2 single shot tray!!
The mags that come with the rifle are nice, and you get 2 of 'em, but wouldn't it be nice to have a single shot tray as well - seeing how lots of other offerings have mags and trays?
Here are two types of tray for your edification - the first is a simple slide in that seats flush with the receiver, and the other has a little handle that sticks out.
Print these with support and the V groove facing the build plate and the pellet hole on the flat face facing upwards. I used 80% infill which works great for a solid part and black PLA which matches the plastic of the gun.
Once printed you will need to run a small round file through the pellet hole to clean things up - or a bit of rolled up fine sandpaper will do the trick.
This may or may not be practical depending on your scope to get a pellet into the tray, but I have a Crosman center-point Open Reflex red-dot which sits behind the magwell and I love it!
I will re-mix this soon to accept side loading of pellets from the bolt side - just wanted to get this out there right away! - UPDATE - side loader uploaded!
| Fusion2SSTray.stl | 20.4KB | |
| Fusion2Tray-cutout.stl | 19.9KB | |
| Fusion2Tray-Handle.stl | 119.7KB |
