ULTUMATE ARROW HOLDER For Survival X Bow 3D Printer Model
The file 'ULTUMATE ARROW HOLDER For Survival X Bow 3D Printer Model' is (stl) file type, size is 3.0MB.
The file 'ULTUMATE ARROW HOLDER For Survival X Bow 3D Printer Model' is (stl) file type, size is 3.0MB.
THIS IS A REMIX OF THE SURVIVAL X BOW V2.0 WHICH IS NOT ON THINGIVERSE ANYMORE.
THIS IS FOR A COMPETITION SO PLEASE LEAVE A LIKE.
The Ultimate Arrow Holder for the Survival X Bow is an accessory for the Survival X bow that allows one to rapidly fire up to SEVEN ARROWS IN A ROW!!! This is done by holding the arrows in a line right next to the arrow rest. Just fire one arrow, and then pull the next one down.
This design consists of two parts, one printed in PLA and the other printed in TPU.
Both parts slide together with NO EXTRA HARDWARE NEEDED!!!
There are two versions of the TPU part, a normal version for harder TPU and a version that has 7mm holes instead of 8mm holes for softer TPU.
If you are having problems with the arrows being too loose inside the part, there is a place to attach a rubber band which should help this.
Try adjusting the infill on the TPU part if it is too loose or too tight.
Let me know what you think, and please upload a make.
DONT FORGET TO LEAVE A LIKE.
| PLA_Part.stl | 6.7MB | |
| TPU_Part.stl | 278.8KB | |
| TPU_Part_7mm.stl | 258.5KB |
