Ultimate Stretch Wrap Dispenser For Film Rolls Of 1.5” – 3.0″ Core Size 3D Printer Model
The file 'Ultimate Stretch Wrap Dispenser For Film Rolls Of 1.5” – 3.0″ Core Size 3D Printer Model' is (stl) file type, size is 7.0MB.
The file 'Ultimate Stretch Wrap Dispenser For Film Rolls Of 1.5” – 3.0″ Core Size 3D Printer Model' is (stl) file type, size is 7.0MB.
Stretch Wrap Dispenser for Film Rolls of 1.5” Core Size.
Cheap dispensers give no tension to the foil, or the whole foil falls of the dispenser.
That is why I made that handle with the adjustable tension.
Tension screw is even locked so it does not open while you use it.
The cones have a deep profile to ensure only the cone turns, not the paper core of the foil.
Needs a M8 threaded rod, and 2-3 M8 nuts
Cone part must be printed twice. Just choose the right size of cone for your foil.
The image shows the 1.5 inch for the smallest foils i found in shop.
| Bottom_Disk_1.5_Inch.stl | 561.5KB | |
| Bottom_Disk_2.0_Inch.stl | 526.9KB | |
| Bottom_Disk_3.0_Inch.stl | 531.4KB | |
| Cone_1.5_Inch.stl | 588.6KB | |
| Cone_2.0_Inch.stl | 522.8KB | |
| Cone_3.0_Inch.stl | 669.4KB | |
| handle.stl | 86.0KB | |
| Polygon_Lock_Pressure_Disk_1.5_Inch.stl | 3.7MB | |
| Polygon_Lock_Pressure_Disk_2.0_Inch.stl | 3.7MB | |
| Polygon_Lock_Pressure_Disk_3.0_Inch.stl | 3.7MB | |
| pressure_disk.stl | 525.2KB |
