Ultimate SFF ITX Gaming Computer 3D Printer Model
The file 'Ultimate SFF ITX Gaming Computer 3D Printer Model' is (stl) file type, size is 86.4KB.
The file 'Ultimate SFF ITX Gaming Computer 3D Printer Model' is (stl) file type, size is 86.4KB.
This is Spock's Ultimate ITX Gaming PC! Featuring a 16 Core CPU, RTX 4060, 32GBs of RAM, and DUAL displays capable of 144hz and touch functionality :D
Please note: this is work in progress, updates will be made until kinks are worked out
Prototype Version 2.2UPDATES: Added new monitor hinge allowing fixed tilt on primary display
Below is EVERYTHING to build a custom computer case that supports:
Stereo speakers
I wanted this to be a fun project and a learning experience. The end goal is to create a computer that can be fast, portable, and a good go to when traveling around. My buddies and I are always hosting gaming sessions; lugging around a full desktop and monitor isn't exactly ideal.. lol
Known issues:
Currently, assembly of everything is a mixture of CA/Superglue and screws. The end goal is to have everything snap together like a lego.
The stands for the motherboard have no holes for screws so the board is just resting
The primary / removable monitor hinges only grip based on how tight the screws are. I am currently designing a ribbed and springed hinge system to allow easy adjustments like a laptop
The top lid of the case just rests in place for now until I design the magnetic latching system
Okay, you've made it this far so here's a list of all of the parts on amazon I used to build this.
Main Hardware:
GPU: GIGABYTE GeForce RTX 4060 OC Low Profile
CPU: MINISFORUM BD790i Motherboard, AMD Ryzen 9 7945HX Onboard
RAM: CORSAIR VENGEANCE SODIMM DDR5 RAM 32GB (2x16GB) 4800MHz
Display Removable: ARZOPA 16.1 inch Z1FC Portable Gaming Monitor 144hz
Display Dedicated: Waveshare 11.9inch Capacitive Touch Screen LCD
PSU: DC 12V 300W 24Pin ATX PICO PSU
Parts and bits:
PCIe Riser For GPU: JMT PCI-Express 3.0/4.0 16x Riser Card 90 Degree
Power Supply: COOLM 12V 25A Power Supply Adapter 300W
Display Dedicated HDMI: CYFPV Dual 90 Degree Right-Up Angled HDMI Type A Male
Display Removable Type C: Fasgear USB C to Type C 3.2 Gen 2x2 Cable 3ft 90 Degree
USBs for dedicated display: x2 chenyang Micro USB Flat Cable USB 2.0 90 Degree
Fpanel PW SWITCH: XMSJSIY Chassis Switch Host Metal Button
USB 3.0 splitter: OwlTree USB 3.0 Header Splitter, Motherboard USB 3.0 Splitter
Speaker Drivers: x2 Dayton Audio DMA45-4 1-1/2" Dual Magnet
Amplifier: DROK Audio Amplifier Board, 5W+5W Mini Amplifier Board
BT Module: DROK Blue~Tooth Board, 12V Audio Receiver
This is far from being complete as a how-to instructible. Bare with me, as I continue to develope and refine this project. Everything has been printed from FlashForge's Adventure 5m using raptor PLA. Needless to say, happy printing!!
| 11.9_LCD_Bezel_Half_1.stl | 5.9KB | |
| 11.9_LCD_Bezel_Half_2.stl | 6.1KB | |
| 11.9_LCD_Enclosure_Left.stl | 2.0KB | |
| 11.9_LCD_Enclosure_Right.stl | 5.3KB | |
| Case_V2_Tabs.stl | 4.2KB | |
| Mini_ITX_Case_Display_Back.stl | 6.6KB | |
| Mini_ITX_Case_GPU_Back.stl | 12.1KB | |
| Mini_ITX_Case_GPU_IO.stl | 15.3KB | |
| Mini_ITX_Case_Mobo_Stands.stl | 684.0B | |
| Mini_ITX_Case_Power_IO.stl | 27.1KB | |
| Mini_ITX_Monitor_Hinge_Case_V2.stl | 21.5KB | |
| Mini_ITX_Monitor_Hinge_Corner_V2.stl | 2.8KB | |
| Mini_ITX_Monitor_Hinge_V2_2.stl | 8.2KB | |
| Mini_ITX_Speaker_Enclosure_V2_Left.stl | 69.2KB | |
| Mini_ITX_Speaker_Enclosure_V2_Right.stl | 71.6KB | |
| Mini_ITX_Speaker_Enclosure_V2_Right_1.stl | 124.7KB | |
| Mini_ITX_Speaker_Enclosure_V2__Left3.stl | 59.5KB | |
| Mini_ITX_V5_Top_GPU_Back.stl | 5.4KB | |
| Mini_ITX_V5_Top_GPU_Front.stl | 5.5KB | |
| Mini_ITX_V5_Top_MOBO_BACK.stl | 6.4KB | |
| Mini_ITX_V5_Top_MOBO_IO.stl | 4.1KB | |
| Mini_ITX_V5_Top_Vent.stl | 18.2KB | |
| Speaker_Wire_Hide_case_stands.stl | 5.6KB |
