Added textures to the brilliant model made by Drussell19:
https://www.thingiverse.com/Drussell19/about
No post processing involved, just glue the parts together and you will have the result in the cover photo!
Mine is sized to 170% which works well for an Ender 3.
*Depending on the scale you print this at, drop the pillars and gates down into the buildplate a few mm to ensure a flat base and good plate adhesion
Print the following:
1 X GATES.stl in a wood like colour
1 X Textured Pillar.stl (Within a .rar due to size) in a stone colour
1 X SIGN.stl in a stone colour, changing filament colour to yellow and red at the desired height (SIGN STL.gcode is pre-sliced at 170% with filament changes for an Ender 3 but any bowden extruder printer with a similar sized build plate should work)
2 X flame_large.stl in orange
6 x flame_small.stl in orange
2 X torchholdertop.stl in stone
6 x torchholder.stl in stone
| flame_large.stl | 132.5KB | |
| flame_small.stl | 112.5KB | |
| GATES_STL.STL | 27.4MB | |
| SIGN_STL.gcode | 5.4MB | |
| SIGN_STL.STL | 202.7MB | |
| Textured_Pillar_STL.rar | 109.6MB | |
| torchholder.stl | 5.4KB | |
| torchholdertop.stl | 3.0KB |
