Ultimate Camera Slider 3D Printer Model
The file 'Ultimate Camera Slider 3D Printer Model' is (stl) file type, size is 4.4MB.
The file 'Ultimate Camera Slider 3D Printer Model' is (stl) file type, size is 4.4MB.
Ultimate camera slider for timelapse and video,
2 axis movement, very stable, cheap, high movement precision, turnable to vertical position.
What you need:
2x motors nema 17, controlled by Miniengine 2.0 (Airic lenz Photography project)
IMPORTANT: Nema 17 dimensions, the 40mm height version is needed!
2x GT2 motor pulley
1x GT2 5mm belt (obviously the length depends by the length you want the slider)
10x 626 ZZ (6x6x19 mm) bearing
1X 6200 (30x9x10 mm) bearing
4x aluminium 18 mm tubes (length of the slider).
M6 bolts, nuts and washers (i will upload the lenght detail list soon).
1x 3/8" bolt and nut
link:
http://www.minie.airiclenz.com
(airic lenz photograper project)
| carrello_sopra.stl | 7.1MB | |
| carrello_sotto.stl | 8.2MB | |
| centrale.stl | 7.2MB | |
| ghiera.stl | 8.5MB | |
| ghiera2.stl | 1.3MB | |
| laterale.stl | 8.4MB | |
| rondella_cinghie.stl | 288.1KB |
