Hi,
This is the 3D printed parts to build a top enclosure for an Ultimaker 2.
It's designed to be easily removable from the printer for the maintenance's operations.
It improve the conditions for printing ABS and prevent from warping. We measured temperatures in the enclosure and we could record about 75-80°C (170°F) max when the heat-bed is about 100-110°C (210-230°F).
You can found the front door enclosure there : http://www.thingiverse.com/thing:1276732
| Angle3Panneau5X-Part1.stl | 384.9KB | |
| Angle3Panneau5X-Part2.stl | 726.5KB | |
| AngleAvD-Part1.stl | 645.4KB | |
| AngleAvD-Part2.stl | 461.8KB | |
| AngleAvG-Part1.stl | 651.0KB | |
| AngleAvG-Part2.stl | 467.9KB | |
| BackStickBracket.stl | 28.0KB | |
| Corner3Side5X.stl | 211.8KB | |
| CornerBackInfLeft.stl | 237.1KB | |
| CornerBackLeft.stl | 109.9KB | |
| CornerBackMidle.stl | 188.5KB | |
| CornerBackRight.stl | 144.0KB | |
| CornerFrontLeft.stl | 211.9KB | |
| CornerFrontRight.stl | 211.9KB |
