UH-1 Huey Helicopter Collective 3D Printer Model
The file 'UH-1 Huey Helicopter Collective 3D Printer Model' is (f3d,stl,zip) file type, size is 35.4MB.
The file 'UH-1 Huey Helicopter Collective 3D Printer Model' is (f3d,stl,zip) file type, size is 35.4MB.
Helicopter Collective Controller
Work in progress.
6/17/20
Added File
Added collective_open v4.f3d (An assembled model of all the parts.)
You can alternatively use my Russian style grip located here:
https://www.thingiverse.com/thing:4293528
Check the link below for general assembly instructions:
Other Hardware needed:
1'' 36'' Aluminum Tube (Typically sells in 36'' lengths.)
Cut as needed: 7'' needed for throttle, 9'' needed for main lower portion.
1/2'' 36'' Aluminum Tube (Typically sells in 36'' lengths.)
Cut as needed: 9-10'' needed for Head support.
Cork Padding cut into 4 or 5 sheets. One of each cut:
5'' x 3 3/8''
5'' x 3 5/8
5'' x 3.925
5'' x 4 5/16
5'' x 4 3/4
Misc
1 Roll of Cork Padding for Grip
1 22mm 608 Skate BearingFidget Spinner Type
2 53/64 in 3'' Compression Spring
2 12ml Syringe and Tube
1 18" Bungee Cord
1 1'' 36'' Aluminum Tube
1 1/2'' 36'' Aluminum Tube
2 Furniture Felt Pads
Screws Nuts and Bolts
4 #6 2'' Drywall Screws (Base)
A bunch #8 1 1/4'' or 31.8mm Construction Screws (Frame)
2 1/4'' Phillips Flat Head Screw (Head TopHat)
8 1'' Phillips Flat Head Screw (Syringe Damper)
2 #10-32 1 1/4'' Machine Screw (Syringe Holder)
2 #8-32 1 1/4'' Machine Screw/w Nut (for Syringe Adapter)
1 #6-32 1 1/4'' Machine Screw/w Nut (for Trigger)
4 #6-32 3/4'' Machine Screw/w Nut (Midway)
2 #6-32 3'' Machine Screw/w Nut (Midway Inner)
1 1/4 2'' Hex Bolt/w Lock Nut (Head)
1 5/16 5-1/2'' Hex Bolt/w Lock Nut (Main Pin)
Electronics:
QTY Type Description
1 BU0836A 12-Bit Joystick Controller Controller Board
1 BU0836A Break out Matrix board
2 Potentiometer P260 Potentiometer
2 Cable with 3 pin connector Cables
4 APEM 637H 2 Toggle Switch
1 LB 8 Way Hat Switch w Mount Kit Hat Switch
1 NKK pushbutton switch MB2011 Push Button
1 APEM 5639A3V Locking Toggle Switch
1 Single-Pole Momentary Push-Button Switch Push Button
Links:
(Optional Controller Clear Plastic Case)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=102&products_id=222]
(BU0836A 12-Bit Joystick Controller)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=94&products_id=204]
(BU0836A Break out Matrix board)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=94&products_id=274]
(Potentiometer)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=103_81&products_id=193]
(Cable with 3 pin connector)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=83&products_id=202]
(APEM 637H 2 Toggle Switch)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=98_123&products_id=289]
(LB 8 Way Hat Switch w Mount Kit)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=98_87&products_id=210]
(NKK pushbutton switch MB2011)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=98_74&products_id=190]
(APEM 5639A3V Locking Toggle Switch)
[http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=98_123&products_id=292]
(Single-Pole Momentary Contact Push-Button Switch)
| collective_open_v4.f3d | 3.3MB | |
| extras_jig.stl | 176.4KB | |
| friction_bearing_spacer.stl | 91.8KB | |
| hat.stl | 537.0KB | |
| head_lower.stl | 1.8MB | |
| head_upper.stl | 804.9KB | |
| main_base.stl | 342.1KB | |
| main_brace.stl | 695.5KB | |
| main_fknob_insert.stl | 188.6KB | |
| main_friction_knob.stl | 1.1MB | |
| main_friction_knob_right.stl | 1.1MB | |
| main_pivot_gear.stl | 1.3MB | |
| main_pot_gear.stl | 1.1MB | |
| mid_lower.stl | 1.7MB | |
| mid_upper.stl | 1.1MB | |
| motion_limiter.stl | 55.5KB | |
| pipe_nut.stl | 320.6KB | |
| pot_adapter.stl | 221.5KB | |
| socket.stl | 101.1KB | |
| spring_holder.stl | 350.2KB | |
| syringe_adapter_mount.stl | 152.7KB | |
| syringe_brace.stl | 190.5KB | |
| syringe_head_adapter.stl | 138.8KB | |
| syringe_holder.stl | 916.5KB | |
| throttle_friction_knob.stl | 2.0MB | |
| throttle_insert.stl | 159.4KB | |
| trigger.stl | 533.5KB | |
| uh1_collective_fusion360.zip | 21.2MB | |
| uh1_collective_stl.zip | 5.6MB |
