Ugrinsky Wind Wall Module 3D Printer Model
The file 'Ugrinsky Wind Wall Module 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Ugrinsky Wind Wall Module 3D Printer Model' is (stl) file type, size is 1.2MB.
You can find a video of this here https://youtu.be/e7ymRJA4qVY
to finish this you will need 36 10 mm by 2mm Neodymium magnets, 0.2mm enameled copper wire on thrust bearing 47mm by 11mm by 25 mm, 4 x 12mmOD 8mm ID by 4mm bearings and a short bar of 8mm steel
| Base.stl | 50.1KB | |
| Coil_Former.stl | 188.9KB | |
| Magnet_Ring.stl | 281.9KB | |
| Stator_Cover_PLate.stl | 25.1KB | |
| Top_Bearing.stl | 155.8KB | |
| Ugrinsky_Base.stl | 1.2MB | |
| Ugrinsky_Blade.stl | 1.3MB |
