UFS-084A Hex Bit – Wera Like Handle With Collet 3D Printer Model
The file 'UFS-084A Hex Bit – Wera Like Handle With Collet 3D Printer Model' is (stl) file type, size is 867.2KB.
The file 'UFS-084A Hex Bit – Wera Like Handle With Collet 3D Printer Model' is (stl) file type, size is 867.2KB.
I needed to design a handle for holding a chisel blade with a round shaft. I decided that I would need some type of collet to grip the shaft with a comfortable handle.
I had downloaded one of those simple push drills years ago. It was a terrible drill but the collet worked ok.
https://www.thingiverse.com/thing:731086
Then I went looking for a screwdriver style handle. There are hundreds if not thousands of these on Thingiverse. The best looking of the bunch that I could find was this one.
https://www.thingiverse.com/thing:4382485 It looks similar to the Wera, but there are many small design differences.
This handle is actually a remix from a design off Grabcad.
https://grabcad.com/library/wera-hex-driver-2mm-1
I added a little blender magic, resized everything to fit together, and I had my handle.Then I thought this could be modified again to hold hex bits instead of a round shaft.
I turned the round hole into a hex and created the part you see.
I made a second similar handle that you can find here:
https://www.thingiverse.com/thing:4620514
Now you just have to add a nice Phillips bit. Lucky for me I have a small box with plenty of these hex bit to turn into screwdrivers.
| Hexbit_Cap.stl | 763.7KB | |
| Hexbit_Handle-1.stl | 1.1MB |
