UFO Key Abduct (Magnetic Holder) 3D Printer Model
The file 'UFO Key Abduct (Magnetic Holder) 3D Printer Model' is (stl) file type, size is 2.3MB.
The file 'UFO Key Abduct (Magnetic Holder) 3D Printer Model' is (stl) file type, size is 2.3MB.
THE KEYS ARE OUT THERE
This is an UFO shaped key holder, which uses magnets to abduct your metal things and stores them conveniently! There are two models, a more complex version and a three part simple one. Print which ever you like and post a make while at it.
Assembly is straight forward, for the more complex version:
Glue the Keepers to the Bottom
Glue the magnets (should be fairly strong, 12x5mm neodymium is enough)
Glue the Magnet_Brace to over the magnets
Glue the Body_Upper to the Ring
Glue the Bottom to the Ring
Glue the Body_Lower to the Ring/Bottom
Glue the Top on the Body_Upper
The simple version
Glue the magnets on the Bottom
Glue the Bottom to the Simple_Body_Upper
Glue the Simple_Body_Lower to the Bottom/Upper
Remember to align the holes in either variant!
Hang it by using something which does not stretch too much, fiber fishing line works great.
Check out my other designs here: https://www.thingiverse.com/Superbeasti/designs
| UFO_Body_Lower.stl | 747.7KB | |
| UFO_Body_Upper.stl | 1021.6KB | |
| UFO_Bottom.stl | 672.2KB | |
| UFO_Keeper.stl | 106.2KB | |
| UFO_Magnet_Brace.stl | 75.1KB | |
| UFO_Ring.stl | 481.1KB | |
| UFO_Simple_Body_Lower.stl | 1.0MB | |
| UFO_Simple_Body_Upper.stl | 1.7MB | |
| UFO_Simple_Bottom.stl | 125.5KB | |
| UFO_Simple_Bottomfor_the_multipart_UFO.stl | 143.7KB | |
| UFO_Top.stl | 1017.8KB |
