A modular, small profile fanshroud for the UBIS 13s hotend
Best printed fan facing sides down without support
I did it with 50% infill
Additional parts needed: at least two M3x15 bolts per fan
and two M3 bolts (min 10 length) to mount them together
V2: updated upper bracket for a better hold and additional use of a zip tie to secure it,
lower bracket is shortened a bit to better the airstreamposition
| 30mm_fan_lower_bracket_v2.STL | 179.7KB | |
| 30mm_fan_upper_bracket_v2.STL | 105.0KB |
