The file 'U.S. Pre-War Tank Pack (1/72 Scale) 3D Printer Model' is (stl) file type, size is 6.6MB.
After the end of WWI, the US began building M1917 and Mk VIII Liberty tanks. However, they began looking into designing and building their own tanks. As with other countries, they struggled with budgets, bureaucracy, and various other enemies of the fledgling US tank corps. Through all of this, they did manage to produce some tanks. They ranged from designs past their prime and dead ends to what would evolve into the famous M4 Sherman. Although they do not command the attention of the vehicles to come, I thought that they deserved some models.
Currently Includes:
Light Tanks
-T1 Cunningham (long & short 37mm gun)
-Marmon-Herrington CTLS 4TAC & 4TAY (Light Tank T16 in the US Service)
-M1 Combat Car (with and without sponson machine guns)
-M2A1 Light Tank
-M2A2 Light Tank
Medium Tanks
-M1921 Medium Tank
-Marmon-Herrington MTLS-1GI4
-Marmon-Herrington CTMS-1TB1
-Marmon-Herrington CTM-3TBD
-M2 & M2A1 Medium
SPGs
-T3 HMC
Note: The CTLS tanks were designed to have turrets that turn only 240 degrees, so this is not a mistake.
Other models to come (eventually). If you have any suggestions as far as other tanks to model, please put them in the comments.
Update 10/7/19-
-Added long 37mm gun turret for T1 Cunningham
Update 10/15/19-
-Added MTLS-1GI4
Update 3/30/20-
-Added CTMS-1TB1
Update 4/13/20-
-Added CTM-3TBD
Update 5/1/20
-Added M1 Combat Car (with and without sponson mgs)
This upload kicks off a few weeks of tank uploads in this pack. One new tank will be released at least each Friday, and possibly more over the next few weeks. Since quarantine is still continuing, I did a bunch of modeling and hopefully I will give you all something to do.
Update 5/5/20
-Added M2A1 Light Tank
Update 5/8/20
-Added M2A2 Light Tank
Update 5/25/20
-Added T3 HMC
Update 5/26/20
-Fixed, improved and added to the M2 Mediums. What was labelled "M2 Medium" here was supposed to be the M2A1, and has now been fixed. M2 Medium was added and the common hull model was improved. Use M2 Medium Hull for both M2 & M2A1.
CTLS_Hull_4TAC.stl | 813.0KB | |
CTLS_Hull_4TAY.stl | 813.0KB | |
CTLS_Turret.stl | 207.0KB | |
CTM-3TBD_Hull.stl | 1.2MB | |
CTM-3TBD_Turret.stl | 499.6KB | |
CTMS_Hull.stl | 1.2MB | |
CTMS_Turret.stl | 480.3KB | |
M1921_Medium_Hull.stl | 273.5KB | |
M1921_Medium_MG_Turret.stl | 13.7KB | |
M1921_Medium_Turret.stl | 18.1KB | |
M1_Combat_Car_Hull.stl | 2.3MB | |
M1_Combat_Car_Hull_Sponson_MGs.stl | 2.5MB | |
M1_Combat_Car_Turret.stl | 204.1KB | |
M2A1_Hull.stl | 2.3MB | |
M2A1_Medium_Turret.stl | 251.9KB | |
M2A1_Turret.stl | 162.8KB | |
M2A2_.30_cal_Turret.stl | 170.1KB | |
M2A2_.50_cal_Turret.stl | 171.9KB | |
M2A2_Hull.stl | 2.3MB | |
M2_Medium_Hull.stl | 1.2MB | |
M2_Medium_Turret.stl | 258.6KB | |
MTLS_Hull.stl | 1.2MB | |
MTLS_Turret.stl | 682.3KB | |
T1_Cunningham_Hull_Revised.stl | 331.7KB | |
T1_Cunningham_Turret.stl | 116.2KB | |
T1_Cunningham_Turret_Long_37.stl | 243.7KB | |
T3_HMC_Hull.stl | 2.2MB | |
T3_HMC_Turret.stl | 161.0KB |