TX02 95mm Racing Frame (1103 Motors) F.Version 3D Printer Model Free Download

Description Files (8)

Summary

Whats new in final version : * Holes for battery strap

4 pillars for better camera mount durability
In build arm reinforcement
Easy to install Flight controller - more space for outlets, battery connector, micro usb
Original camera mount : https://www.thingiverse.com/thing:1954514
95-100mm Frame
Weihgt : under 16g (Printed with 60% infill)
Using 1103/1104 motors
20x20mm flight controllers : 4mm holes for screws
FPV Camera - TX02/RX01 + hole for buzzer's pins behind camera mount
BE CAREFUL when you sliding camera to holder, if you do that with a lot of pressure you can break some electronic part in back of your TX01/02. My TX02 don't working after sliding in, I must solder 0.15mm condenser back in to place, but almost impossible to do !

Glue everything together with second glue (if wits well it's not necessary)
For glue reinforcement well use tape and some weight to push it down. (as on last picture)

TIP : After reinforcement get printed, keep printer's hotbed cool down, if you will try to peel it off when it's hot, it can bend and it won't fit well on frame.
I used : KingKong 1103 motors
20x20mm FC with 10A ESC's
Gemfan 2035
Eachine TX02
If you print one, let me know PLS ! :)

On the finish i just want to say that frame made of pla i very fragile, use abs or buy 10x stronger carbon fiber

antenna_shield.stl	42.1KB
camera_mount.stl	39.4KB
cam_holder_final.stl	49.1KB
everything.stl	499.9KB
Frame_final.stl	398.6KB
frame_V2.stl	313.2KB
pads_for_final_frame.stl	100.1KB
reinforcement.stl	29.0KB

TX02 95mm Racing Frame (1103 Motors) F.Version 3D Printer Model

Summary

Easy to install Flight controller - more space for outlets, battery connector, micro usb

Tags

You might also like