A two handed probable POWER jam ''in your face'' mode.
I designed players , the whole project is here https://3dwarehouse.sketchup.com/model.html?id=u5ef606da-a677-489e-8012-1f9e3e1a0a6a
the basket was found on sketchup warehouse community as the ball and players shoes.
I did not print the basketball pole (you can anyway take it from my other project http://www.thingiverse.com/thing:1405523) as I preferred to use some piece of metal soldered on the base and glued on the basket . From the pictures as you can see from the golden nut put there on purpose (it's a 10 mm external diameter) , the print is pretty small so I suggest to have the things printed at least at 50 % infill and a slow speed rate .
Printed on transparent PLA .
The two players are glued together.
In order to add the support for the player ,
take with pliers a metal rigid wire , warm it with a lighter or solder iron and insert the hot edge inside the lower player's foot . Then glue it or solder on the base . In case you don't want to use hot instrument you can anyway use resistent glue (the whole two players are light enought) .
| Omo1pic.stl | 6.6MB | |
| Omo2pic.stl | 6.2MB | |
| retinapic.stl | 375.3KB | |
| tabellapic.stl | 574.1KB |
