1.Print the inner and measure it, then edit the model and print again. You'll need a cube at real size 9.45mm^3.
2.Change another color.
3.Print outter. Pause the printer at the first layer over 11mm.
4.Put the inner inside of the outter.
5.Resume and finish the print.
Add these into the Gcode at the right layer:
G1 X0.0 Y0.0 ← Move the extruder to 0,0
M25 ← Pause the print
| dice_inner.stl | 574.9KB | |
| dice_outter.stl | 260.1KB |
