The scale in SelfCAD and XYZ axis were different, so I rotated it on the X axis 90 degrees and scaled it to 50 (x) x 80 (y) x 50 (z) mm. (1.97 x 31.15 x 1.97 inches)
I didn't use supports, just print in place with a brim added. I always like using a brim because my plate doesn't hold very well. It's easy to remove and doesn't leave marks.
I use an Anycubic Kobra 2 Neo.
It takes 2h 4m 47s to print. 10.5m of filament and weighs 31.52g. I used Lychee (slicer) default settings for my printer and 200um layer size.
| twisted_star.stl | 1.7MB |
