Twin Jet RC Boat V1 3D Printer Model

Author: @
License: CC BY
File formats: stl
Download type: zip
Size:6.4MB

The file 'Twin Jet RC Boat V1 3D Printer Model' is (stl) file type, size is 6.4MB.

Summary

This was modeled after my Water Jet model.

REQUIRED TO COMPLETE:

  • two 220X or 230X brushless outrunner motors
  • two 3mm shafts (threaded or non-threaded, about 75mm or 3" long)
  • four 8x4x3mm bearings
  • two 2mm rods or four M2 screws (for steering system)
  • two ESCs for the motors
  • two 9g servos
  • two steering boots and push rods for servos
  • 2.4GHz transmitter and compatible PPM receiver
Cover.stl 1.3MB
Cover_Clip.stl 41.8KB
Fin_L.stl 89.4KB
Fin_R.stl 89.4KB
Hull.stl 2.9MB
Impeller_L.stl 3.0MB
Impeller_R.stl 3.0MB
Motor-Shaft_Connector_X2.stl 963.4KB
Steering_Bowl_L.stl 1.1MB
Steering_Bowl_R.stl 1.1MB
Steering_Nozzle_L.stl 1.3MB
Steering_Nozzle_R.stl 1.3MB