This is a mostly printable Twin I-Beam Front Suspension system for RC prerunners. If being used with an existing chassis some modifications will need to be made to the mounting setup as I have it designed for a custom printed chassis that is a work in progress. The rear part is available here.
To complete you will need 120mm shocks, a standard size servo, 4x 10x15x4 bearings, and a collection of M3 and M4 screws of different lengths. It's designed for generic crawler tires and wheels.
Hub-to-hub width is 231.7mm.
If you need to make any changes it's up on OnShape here.
Let me know how this works for you if you print it!
| TIB-BeamMount.stl | 182.9KB | |
| TIB-Frame.stl | 101.4KB | |
| TIB-LeftBeam.stl | 155.9KB | |
| TIB-LeftHexAdapter.stl | 41.9KB | |
| TIB-LeftKnuckle.stl | 86.4KB | |
| TIB-LeftShockTower.stl | 85.6KB | |
| TIB-LeftSpindle.stl | 34.8KB | |
| TIB-LeftSwing.stl | 82.3KB | |
| TIB-LeftSwingMount.stl | 58.6KB | |
| TIB-LeftTie.stl | 40.3KB | |
| TIB-LeftTrackBar.stl | 39.1KB | |
| TIB-LeftTrackMount.stl | 58.5KB | |
| TIB-RightBeam.stl | 155.2KB | |
| TIB-RightHexAdapter.stl | 41.9KB | |
| TIB-RightKnuckle.stl | 86.4KB | |
| TIB-RightShockTower.stl | 85.6KB | |
| TIB-RightSpindle.stl | 34.8KB | |
| TIB-RightSwing.stl | 82.3KB | |
| TIB-RightSwingMount.stl | 58.6KB | |
| TIB-RightTie.stl | 40.3KB | |
| TIB-RightTrackBar.stl | 38.4KB | |
| TIB-RightTrackMount.stl | 58.5KB | |
| TIB-ServoMount.stl | 113.8KB | |
| TIB-SteeringInput.stl | 41.7KB | |
| TIB-TieRod.stl | 41.7KB |
