Tweaked Betrayal At House On The Hill Dice Tower 3D Printer Model Free Download

Description Files (14)

Summary

Original design by Taython! All credit to them for this great idea and model!
(Follow the link to the original model for more instructions, comments, and makes of this design)

Main Changes:

Tweaked "Floor 1" so that the dice catch can slide in further. Also thickened a couple of small segments that were too thin to print with 0.4mm
Remodeled the tea light holder to be smoother, and easier to insert/remove.
Added a "retention cover" that can be glued in place above the tea light holder, to prevent the holder from falling into the house.
Added optional bottom covers/plates, that can be used to close off the bottom, and give a slightly nicer/more finished look.

Additional changes:

Manually repaired Awning mesh
Fixed floor 2 mesh using netfab

I really like this design and wanted to print one for myself. However, there were a couple of things I wanted to add/tweak for my use, and I thought it would be good to share in case someone else gets use out of it.

I've also re-uploaded the original models alongside these modified models, just for convenience. Again, all credit to Taython for their creation!

Attic_[unmodified.stl	73.3KB
Awning_[mesh_repaired.stl	35.1KB
Balcony_[unmodified.stl	187.1KB
Bottom_plate_-_no_tealight_cutout_optional.stl	9.8KB
Bottom_plate_optional.stl	29.5KB
Dice_Catch_bottom_plate_optional.stl	20.2KB
Dice_Catch_[unmodified.stl	155.8KB
Floor_1_[slide_adjusted.stl	471.2KB
Floor_2_[netfab_fixed.stl	338.2KB
Slider_Stops_print_2_[unmodified.stl	684.0B
Tea_Light_holder_Needs_supports_[remodeled_-_smoother.stl	603.2KB
Tea_Light_retention_cover_Optional.stl	507.1KB
Widows_Walk_passthrough_optional-USE_SUPPORTS_[unmodified.stl	102.2KB
Widows_Walk_Solid_optional-USE_SUPPORTS_[unmodified.stl	101.5KB